Bass Fishing Doc Band Wrap

Information and installation of Doc Band Wraps

Bass Fishing Doc Band Wrap! WE RECOMMEND YOU ONLY ORDER THIS DESIGN IF YOU HAVE A DOC BAND.  Full helmet styles are more difficult to wrap and you might not get good results.

This outdoor and wildlife helmet design is physical vinyl - this is not a "we email you an image and good luck turning it into something real", and we have a video showing exactly how to install the wrap.  It will measure 9.5 inches by 24 inches.

Please note #1 - we show the wrap as a form-fitting outline for demonstration purposes but we will mail a full rectangle and the installer will trim the vinyl to fit your band.

Please note #2 - If your band is personalized, we need to know which side your Doc Band opens on so we can place the name in the correct location.

Please note #3 - by default we will make the name 1.35 inches tall which works with most doc bands.  However, some small doc bands might need the name as little as an inch high.  Please measure yours and let us know if the name height needs to be reduced.

Please note #4 - the background color is default but can be changed by request - please note any color change in special instructions.

Please note #5 - we include the clear laminate.

ALSO NOTE - you will want to find a local vinyl shop (there are seemingly millions of them) to professionally install this.  Installation should not be expensive, $25-$40 are typical fees.

In stock
SKU
byb-wrap-Bass Fishing
$34.99

Maximum 15 characters

Information and installation of Doc Band Wraps

Bass Fishing Doc Band Wrap! WE RECOMMEND YOU ONLY ORDER THIS DESIGN IF YOU HAVE A DOC BAND.  Full helmet styles are more difficult to wrap and you might not get good results.

This outdoor and wildlife helmet design is physical vinyl - this is not a "we email you an image and good luck turning it into something real", and we have a video showing exactly how to install the wrap.  It will measure 9.5 inches by 24 inches.

Please note #1 - we show the wrap as a form-fitting outline for demonstration purposes but we will mail a full rectangle and the installer will trim the vinyl to fit your band.

Please note #2 - If your band is personalized, we need to know which side your Doc Band opens on so we can place the name in the correct location.

Please note #3 - by default we will make the name 1.35 inches tall which works with most doc bands.  However, some small doc bands might need the name as little as an inch high.  Please measure yours and let us know if the name height needs to be reduced.

Please note #4 - the background color is default but can be changed by request - please note any color change in special instructions.

Please note #5 - we include the clear laminate.

ALSO NOTE - you will want to find a local vinyl shop (there are seemingly millions of them) to professionally install this.  Installation should not be expensive, $25-$40 are typical fees.

Write Your Own Review
You're reviewing:Bass Fishing Doc Band Wrap
Your Rating
Would you like to watch us demonstrate application, helmet painting, heat transfer application, and cleaning the funk from cranial bands?
It's all right here!
Our master education page